Industrial Burner
Manufacturer : Baltur Sp.A., Italy

• Burner Model: BT 120 DSN 4T
• Burner Operation : Two Stage (High /Low)
• Fuel Adaptability : Heavy Oil or Furnace Oil
• Electrical Supply : 3N AC 50Hz 400V
• Motor : 2.2 KW
• Note : Equipped with air closure device.

TECHNICAL AND FUNCTIONAL CHARACTERISTICS

• Heavy oil burner.
• Two-stage operation (high/low flame).
• Ability to operate with any type of combustion chamber.
• High pressure mechanical atomisation of fuel using nozzle.
• Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.
• Maintenance facilitated by the fact that the atomisation unit can be removed
• without having to remove the burner from the boiler.
• Air flow regulation for first and second stage by means of electric servomotor
• with pause closure of gate to prevent any heat dispersion to flue.
• When using heavy oil of viscosity up to 20°E at 50°C, add the kit (to order separately) consisting of: resistors for the pump, the atomisation unit and first and second stage solenoid.
• When using low sulphur heavy oil, add the kit (to order separately) consisting of: specific line filter, stainless steel flexible hoses and resistors for pump, atomisation unit and and first and second stage solenoid.
• Equipped with one flange and one insulating seal for boiler fastening, 2 flexible hoses, one line filter and 2 nozzles.

Design features

• Light aluminium alloy fan part.
• High performance centrifugal fan.
• Combustion air intake with air flow adjustment device.
• Sliding boiler coupling flange to adapt to head protrusion of the various types of boilers.
• Adjustable blast-pipe with stainless steel nozzle and deflector disk in steel.
• Three-phase electric motor to run fan and pump.
• Gear pump with pressure regulator and fuel stop-cock valves.
• Atomisation unit with nozzle-closing pin.
• Electrical fuel preheater comprising antigas valve, filter, thermometer and minimum and regulation thermostat.
• Automatic control and command equipment for the burner compliant with
• European standard EN230.
• Flame presence check by photoresistance.
• Control panel comprising stop/go switch, 1st/2nd stage selector, and operation, block and pre-heating resistors on indicators.
• Terminal block for the electrical and thermostatic supply for the burner and to control the second stage of working
• Electrical plant protection rating IP40.