Industrial Burner-BT 350 DSPN 50Hz

Industrial Burner-BT 350 DSPN 50Hz

In Stock

 

Thermal Capacity : 1284 – 3907 KW

View List
Quantity:
Compare

Industrial Burner
Manufacturer : Baltur Sp.A., Italy

  • Burner Model: BT 350 DSPN
  • Burner Operation : Mechanical Modulation
  • Fuel Adaptability : Furnace Oil or Heavy Oil
  • Electrical Supply : 3N AC 50Hz 400V
  • Motor : 9.0+2.2 KW
  • Note : Equipped with air closure device.

Technical and functional features: 

  • Heavy oil burners.
  • Two-stage progressive output operation.
  • Ability to operate with output modulation by means of automatic RWF40 regulator mounted on the  control panel.
  • Compatible with any type of combustion chamber.
  • High pressure mechanical atomisation of fuel using nozzle.
  • Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.
  • Maintenance facilitated by the fact that the atomisation unit can be removed without having to remove the burner from the boiler.
  • Minimum and maximum air flow regulation for first and second stage by means of electric servomotor with pause closure of gate to prevent any heat dispersion to flue.
  • When using heavy oil of viscosity up to 50°E at 50°C consisting of: self-cleaning line filter with resistor and thermostat and resistors for pump and pressure regulator valve.
  • Comes with 2 flexible oil pipes, 1 oil filtre, 1 flange and 1 insulating seal to connect the burner to the application. Nozzle must be ordered separately according to the burner nominal output reqired..

Design features

  • When using low sulphur heavy oil, add the kit consisting of: specific line filter, stainless steel flexible hoses and resistors for pump and pressure regulator valve.
  • Light aluminium alloy fan part.
  • High performance centrifugal fan.
  • Combustion air inlet with device to adjust the air flow.
  • Sliding boiler coupling flange to adapt the head protrusion to the various types of boilers.
  • Adjustable blast-pipe with stainless steel nozzle and deflector disk in steel.
  • A three-phase electric motor to run fan and another to run the pump.
  • Air pressure switch to ensure the presence of combustion air.
  • Electric servomotor with mechanical cam for simultaneous regulation of combustion air and fuel.
  • Gear pump with pressure regulator.
  • Atomisation unit with magnet to control the outlet/nozzle return pins.
  • Sequence controller – EN 230..
  • Photoresistance flame scanner.
  • Terminal block for the electrical and thermostatic connections to the burner and to control the second stage of working or for the connection of the electronic output regolator.
  • Electrical plant protection rating IP40.
  • Electrical fuel preheater comprising antigas valve, self-cleaning filter,
  • thermometer and minimum and regulation thermostat.Control panel comprising stop/go switch, automatic/manual and minimum/ maximum selector, and operation, block and pre-heating resistors on indicators.
Weight 466 kg
Kilowatt

3001-5000

Reviews

There are no reviews yet.

Be the first to review “Industrial Burner-BT 350 DSPN 50Hz”

Your email address will not be published. Required fields are marked *

Your custom content goes here. You can add the content for individual product
Back to Top
Shopping Cart
Close

No products in the cart.