Industrial Burner
Manufacturer : Baltur Sp.A., Italy

• Burner Model: BT 180 DSN 4T
• Burner Operation : Two Stage (High /Low)
• Fuel Adaptability : Heavy Oil or Furnace Oil
• Electrical Supply : 3N AC 50Hz 400V
• Motor : 3.0 KW
• Note : Equipped with air closure device.

TECHNICAL AND FUNCTIONAL CHARACTERISTICS

• Heavy oil burners.
• Two-stage operation (high/low flame).
• Compatible with any type of combustion chamber.
• High pressure mechanical atomisation of fuel using nozzle.
• Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.

DESIGN FEATURES

• Light aluminium alloy fan part.
• High performance centrifugal fan.
• Combustion air inlet with device to adjust the air flow.
• Sliding boiler coupling flange to adapt the head protrusion to the various types of boilers.
• Adjustable blast-pipe with stainless steel nozzle and deflector disk in steel.
• Three-phase electric motor to run fan and pump.
• Gear pump with pressure regulator and fuel stop-cock valves.
• Atomisation unit with nozzle-closing pin.
• Sequence controller – EN 230..
• Photoresistance flame scanner.
• Electrical plant protection rating IP40.
• Electrical fuel preheater comprising antigas valve, filter, thermometer, minimum and regulation thermostat; security thermostat
• When using low sulphur heavy oil, add the kit (to order separately) consisting of:Specific oil filter.Stainless steel flexible hoses and resistors for pump.Spray
• nozzle unit.1st and 2nd stage solenoid valves.
• Comes with 2 flexible oil pipes, 2 nozzles, 1 oil filter, 1 flange and 1 insulating seal to connect the burner to the application.
• Control panel comprising stop/go switch, 1st/2nd stage selector, and operation, block and pre-heating resistors on indicators.
• Terminal block for the electrical and thermostatic connections to the burner and to control the second stage of working.
• Maintenance facilitated by the fact that the atomisation unit can be removed without having to remove the burner from the boiler.
• Air flow regulation for first and second stage by means of electric servomotor
• with pause closure of gate to prevent any heat dispersion to flue.
• Fuel oil with a viscosity of up to 20°E at 50°C may be used by adding to the
• burner a kit including: Heating elements for pump.Heating elements for spray
• nozzle unit.Heating elements for 1st and 2nd stage solenoid valves.